The Ghost Immobiliser
Immobilisers are a potent tool to fight vehicle theft. They prevent the car from being started without a key fob. They also are effective in stopping hotwiring and other traditional methods of vehicle theft. Innovative methods like key cloning or relay theft are becoming more prevalent.
The Ghost Immobiliser was designed to combat these trends and make your car unnoticeable. It's silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle in order to stop key cloning and theft. It is an TASSA approved product and has been approved by insurance companies. It is almost undetectable by thieves and operates in silence. It uses buttons on your steering wheel, center console and doors to create an unique pin code that must be entered before you are able to start your vehicle. You can create as many as 20 different sequences to increase security. The system is easy to install and doesn't require additional hardware.
It is recommended to use an accredited immobiliser CAN installer who is specialized in your specific vehicle type to get the most effective results. Ideally, they will have a workshop located in your local area, allowing you to visit and get the installation completed. They'll also have a range of tools and equipment to aid you in the process of installing. They will have basic hand tools, a multimeter and insulation tape and heat shrink tubing to secure the connections. A user's manual will give specific instructions for the wiring of your vehicle.
Before beginning the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is essential to verify the location of the CAN H and L wires, as incorrect identification could lead to an inefficient system integration. It is recommended to mark the wires with small pieces of tape or mark them with labels. Make use of a multimeter to ensure that the power source is providing the same 12V.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, such as jamming or spoofing. These methods work by amplifying the signal transmitted from your key fob to the electronic control unit in your vehicle. With advanced anti-jamming technologies and vigilant monitoring your vehicle, it can be protected from these sophisticated attacks.
Increased security
A ghost immobiliser provides an extra layer to protect your car against theft. It has a PIN security system that can be entered using buttons on your steering wheel or dashboard, making it harder for thieves to steal your car. The device is designed to be hidden inside your vehicle. It doesn't have any lights or other indicators to alert potential burglars to its presence. It connects directly to the ECU of your car via the data bus. This means it isn't vulnerable to relay attacks or hacking.
The system is an excellent investment for those who own luxury vehicles, as they are at a greater risk of theft because of their value and popularity. Its enhanced security features protect against key duplicates, ECU swapping, and other threats to your car's security. Ghost immobilisers can be connected to apps, which means you can arm and dearm easily. They can include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
Another advantage of a ghost immobiliser is that it does not require any wire cutting. This is a good option, particularly if you have a newer car that doesn't have immobiliser technology built-in to it. Certain systems might also be capable of integrating with the GPS tracking device, providing additional security for your vehicle. Having a GPS tracker may also aid in reducing your insurance premiums. If you decide to purchase an immobiliser for ghosts, make sure that it is TASSA verified and a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to work with all major brands and models of vehicle protecting your vehicle from theft. It generates a unique pin code by pressing buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. The system is tamper-proof, undetectable and backed by three-year guarantee. It is also fully endorsed by insurance companies and insurance companies, which means it can lower your premiums.
The Ghost system differs from the normal immobilisers, which use the key fob to provide ignition control. It is connected directly to the engine controller through the CAN bus. This means it's secure from tampering, is nearly impossible to disable or remove and cannot be targeted by organized car theft gangs. In addition it is possible to use the Ghost system can be linked with a secure iPhone application that allows remote monitoring and management.
You can design an PIN that is easy to remember, yet mathematically impossible to guess for thieves. The PIN can be customized and changed at any point, so you can keep your car secure even if it's parked on the streets or in a public parking lot. You can also select valet or service mode when someone else requires your vehicle for a short period for instance, when it is in the garage. This is an excellent way to stop your vehicle from being stolen by a scammer mechanic. You can opt for a Ghost Call alert to give you additional security. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser guards your vehicle from theft techniques like key replication or relay attacks. It works by connecting to the car's CAN data network and blocking communication with engine ECU. This makes it impossible for thieves to copy or hack your car, making the installation of this system a good idea for all drivers.
Once installed, you will need to enter a PIN number up to 20 digits using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely hidden and unnoticeable to thieves since it doesn't emit any radio frequency signals. It is also able to be configured to allow a user-changeable PIN code, which further enhances its security. The system is also designed to stop cutting of circuits and makes it virtually impossible to hack into.
If you have a problem remembering your PIN, there are systems that allow you to communicate with the immobiliser using an app on your phone and instantly disarm it. Some even have a service/valet mode that allows you to start your car temporarily, such as when you need to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also indetectable to thieves because it does not transmit any radio signals, which is a significant advantage over other aftermarket car security systems. It is also simple to use and doesn't require any complicated wiring. You can also use it in conjunction with a dash camera for additional security. This dash cam is Thinkware F70, which features clear & sharp 1080p HD dashcam footage, Format Free Technology and parking mode. The system can be hardwired to guarantee maximum performance and longevity.
Installation
It's crucial to choose the most reliable immobiliser ghost in order to protect your car from thieves. This device can stop car thefts by preventing the communication between key fobs as well as the engine controller unit. This stops thieves from stealing the signal and then cloning your key fob to start your vehicle. It also can detect the presence of a tamper and alert the vehicle owner.
The device is simple to install and can be integrated with your vehicle's existing systems. It doesn't require any modifications to the wiring in your vehicle and can be tucked away in a hidden place, like under the dashboard. Follow the directions in the manual to make sure the device is installed correctly. It is also crucial to test the system after installing it. This will ensure the ghost of the immobiliser works as it should.
You can purchase an Autowatch Ghost 2 immobiliser from an authorized installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to steal the system or bypass it. The installation process generally takes between 2 and 3 hours.
During the process of installation it is recommended that you look up the wiring diagram for your vehicle model. This will allow you to find the CAN High & CAN Low wires needed to connect your Ghost to the engine of your vehicle. Double-check all connections to make sure they're secure and insulated.
Once the installation is completed, you can begin using the Ghost Immobiliser as normal. It will shut off the ignition of your vehicle in the event that it isn't started with the correct PIN code which you can create yourself. The ghost of the immobiliser can be set to Service/Valet Mode if you need your vehicle cleaned or valet parking.